International experience of green development in Western China: an overall review of policy and practice

Green development emphasizes co-development between economic and environmental dimensions, and is a people-centered sustainable development approach. Western China demands green development, and international experience could provide necessary, unique and important help and support for Western China to achieve its green development goals. This paper has made a comprehensive overall review and analysis of international experience in green development policy and its implementation, in particular, OECD countries’ (mostly Australia and Canada) experience have been analyzed following the major policy foci defined by the Task Force on Strategy and Policies on Environment and Development in Western China initiated by China Council for International Cooperation on Environment and Development (CCICED). Data and information were gathered from the field surveys and investigations, expert meetings, as well as literature review. The main sessions include policy framework and road map establishment, implementation and performance assessment, co-development between economic development and environmental protection, as well as green employment and poverty alleviation. The paper has addressed five policy considerations for the future promotion of green development in Western China.     

Research on whole life cycle carbon emission model of typical buildings

Based on the theory of life cycle assessment (LCA), this article analyzes the influence factors on carbon emissions from residential buildings. In the article, the life cycle of residential buildings has been divided into five stages: building materials production period, construction period, operation and maintenance period, demolition period, and solid waste recycle and disposal period. Based on this definition, the authors provide a theoretical model to calculate carbon emissions of residential building life cycle. In particular, the factor of human activities was introduced in the calculation of carbon emissions from the buildings. Furthermore, the authors put forward a model for calculation with the unit of carbon emissions for per-capita living space.     

污水生物处理实际工艺中氧化亚氮的释放：现状与挑战

介绍了污水生物处理过程中N2O的产生途径,重点分析了污水厂典型脱氮工艺的N2O释放差异及其原因,提出了城市污水脱氮处理过程N2O减排的具体措施,并估算出全国城镇污水处理厂2011年N2O释放总量约为1.26×109g(以N计),对今后关于城市污水脱氮处理过程N2O产生及减排的研究趋势进行了评估.     

工业锅炉PM2.5产排特性试验研究

采用荷电低压颗粒撞击器(ELPI)对哈尔滨市两台燃用烟煤的工业锅炉PM2.5排放特性进行了研究.研究结果表明:PM2.5的粒数和质量浓度分布曲线均呈现单峰分布,前者峰值出现在0.12~0.2μm粒径范围内,这部分粒子主要是由无机物气化-凝结形成的亚微米颗粒物和挥发分未完全燃烧形成的炭黑粒子,而后者峰值出现在0.32μm处,粒子主要是由炭黑粒子形成的亚微米颗粒和残灰粒子形成的超微米颗粒.同时发现,旋风除尘和湿法除尘对PM2.5各级颗粒均有一定的去除效果,采用多管旋风和冲击水浴除尘器联合除尘效率比单种水膜除尘器除尘效率高;湿法脱硫系统对PM2.5的脱除也有明显的作用,由于除雾器不能全部去除小雾滴,这些雾滴中固体颗粒被干燥和水溶性物质结晶析出,PM0.32颗粒物粒数浓度有所增加,而PM0.32~2.5的颗粒物粒数浓度有所减少,但总质量浓度降低.     

我国环境保护科技创新工作“十二五”进展与“十三五”展望

推进环保科技创新是加快环境管理战略转型的重要基础和支撑。论述了科技创新在我国环境保护管理中的作用,回顾了"十二五"期间在水、大气、土壤、生态、固废与化学品等领域环保科技工作的进展与成效,提出了"十三五"环境保护科技工作的发展方向和重点任务。     

河流线型对河流自净能力的影响

为研究河流线型对河流自净能力的影响,选取5条具有不同河流线型的河涌进行研究,以弯曲度和分形维数表征河流线型,以TP、NH 3-N、NO 2-N、NO 3-N、COD Cr、TOC、DOC、叶绿素(Chlorophyll)和蓝绿藻藻蓝蛋白(BGA-PC)等9项水质指标沿程削减率表征河流自净能力,并分析各研究河段的悬浮微生物生物量和生物活性,探讨河流线型影响河流自净能力的作用机制。结果表明:多项水质指标沿程削减率随河流线型蜿蜒程度的增加而提升。在直立式浆砌石挡墙河段,河流线型通过提高悬浮微生物生物活性,进而增强河流自净能力,使TP、NH 3-N、NO 3-N、DOC、Chlorophyll和BGA-PC的沿程削减率显著提升;而在格宾石笼挡墙河段,河流线型通过增加悬浮生物生物量和提高生物活性,进而增强河流自净能力,使NO 2-N、COD Cr、TOC和DOC的沿程削减率显著提高。     

FeBiO_3的制备及光催化氧化性能研究

以多胺羧酸(H5dtpa)为配体获得同时含铋和铁双金属配合物的配位分子前驱体,通过低温热分解前驱体制得Fe-Bi-O三元复合纳米氧化物粉末。采用XRD、SEM、Uv-Vis DRS、PL以及VSM等方法对所得复合氧化物进行结构和性质表征。结果表明所制备的复合物粒径在100 nm左右,主相为Fe Bi O3,在室温时表现出弱铁磁性,其弱磁性可能来自Fe Bi O3的尺寸限域效应。该复合物在200~600nm范围对光具有较强的吸收,其直接带隙λeg=2.02 e V。另外,分别以甲基橙和苯酚为降解模型,初步研究了其光催化氧化性能,于20 mg/L的弱酸性甲基橙溶液和苯酚溶液中分别添加0.25 g/L制备的Fe Bi O3粉末,甲基橙溶液光照5 h后脱色率为90%,而苯酚溶液光照4 h脱色率达100%。     

推进养殖污染防治,实现产业优化与环境保护双赢——对《水污染防治行动计划》的解读

针对《水污染防治行动计划》提出的畜禽养殖污染治理思路和措施,梳理了我国现阶段畜禽养殖污染防治中存在的问题,对《水污染防治行动计划》中提出的"调布局、建设施、促利用"三大举措进行了分析和解读,提出了落实《水污染防治行动计划》的几项重点工作,为地方推进畜禽养殖污染防治工作提供参考。     

面向区域阴极保护的新型智能电源系统及控制方法

针对区域阴极保护的特点,提出一种新型智能电源系统,介绍了系统架构及控制方法.该系统以断电电位为控制电位,具有多路输出、多监测点、同步通断等优点,弥补了传统恒电位仪的不足,提升了区域阴极保护的现代化管理水平.     

石化企业35kV输电线路防雷对策研究

采用ATP-EMTP仿真软件建立有无避雷线输电线路的仿真模型,并考虑接地电阻、档距大小,进行仿真比较.结果表明:杆塔塔顶电压与接地电阻成正比,并呈线性增加,随着电阻值增加,杆塔塔顶电压增加越来越快;当杆塔水平档距小于100 m时,直击杆塔塔顶电压随档距的增加呈线性增长,当档距大于100 m时,杆塔塔顶电压的变化就不明显了;验证35 kV线路全线架设避雷线可有效降低输电线路杆塔塔顶电压幅值,提出石化企业35 kV输电线路应全线架设避雷线.